• Anaerobic Glue 30 Mins 10g (FBAN552-1)
  • Anaerobic Glue 30 Mins 10g (FBAN552-1)

Anaerobic Glue 30 Mins 10g (FBAN552-1)

Bonding Function: Sealing and Bonding
Morphology: Gel
Application: Automobile, Construction
Material: Anaerobic
Classification: Room Curing
Main Agent Composition: Anaerobic
Samples:
US$ 1/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Gold Member Since 2014

Suppliers with verified business licenses

Basic Info.

Model NO.
FBAN552-1
Characteristic
Weatherability
Promoter Composition
Curing Agent
Composition
Anaerobic
Color
Clear
Size
10g/Tube
Transport Package
10g/Tube, 15tubes/Smal Box, 300tubes/Big Box
Specification
SGS. GMP, ISO
Trademark
FIRM BOND
Origin
China
HS Code
35069900
Production Capacity
10000cards/Day

Product Description

Anaerobic Glue 30 Mins 10g (FBAN552-1)


Quick Details


Place of Origin: Hunan, China (Mainland)
Classification: Other Adhesives
Main Raw Material: anaerobic
Usage: Construction, chemical area, industry, civilian use
Brand Name: FB
ITEM NO: FBAN552-1
Color: light yellow
Viscosity(CPS): 7000-13000
Initial curing time: 30minutes
Totally curing time: 24hours
Temperature resistance: -60 to +220
Guarantee period: 24months

Packaging & Delivery

Packaging Details:Specifications: 10 g/ tube 15 tubes/small box 300 tubes /big box, Size:47 x 32 x 21.5(cm)
Delivery Detail:35days after deposit

Specifications
It is applied on the seal and lock for kinds of screw thread in pipes, it solved the problem of low utilization rate and serious osmosis when using traditional sealing material.

Applicable scope
It was applied on the seal and lock for kinds of pipe, it solved the problem of low utilization rate and serious osmosis when use the traditional sealing material, and used for sealing and locking of the pipe and screw thread in chemical area, industry, civilian area, air-condition , water supply , military industry, gas pipe etc.

How to use
1,Clean  the oil on the surface by cotton cloth before installation.
2,If install for copper, steel, iron pipe material above 25degree,do the pressure test after2-4 hours, if temperature between 25degree to 15degree,do the pressure test after 4-8hours,if temperature between 15degree to 0degree,do the pressure test after 8-16hours.If applied for the stainless steel, aluminum, alloy steel, the time to do the pressure test should be double long.
3, Good performance on sealing, do not need over tight when install. When lock the pipe within DN32, can be sealed totally just screw down by hand.
4, Coat the glue outside when applied on pipe for drinking water.
 
 

Send your message to this supplier

*From:
*To:
avatar Mr. Marvin
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now