Anaerobic Glue 30mins 50g (FBAN552-2)
Place of Origin: Hunan, China (Mainland)
Classification: Other Adhesives
Main Raw Material: anaerobic
Usage: Construction, chemical area, industry, civilian use
Brand Name: FB
ITEM NO: FBAN552-2
Color: light yellow
Initial curing time: 30minutes
Totally curing time: 24hours
Temperature resistance: -60 to +220
Guarantee period: 24months
Packaging & Delivery
Packaging Details:Specifications: 50 g/ tube, 10 tubes/small box, 120 tubes /big box, Size:37.5 x 33 x 34.5(cm)
Delivery Detail:35days after deposit
It is applied on the seal and lock for kinds of screw thread in pipes, it solved the problem of low utilization rate and serious osmosis when using traditional sealing material.
It was applied on the seal and lock for kinds of pipe, it solved the problem of low utilization rate and serious osmosis when use the traditional sealing material, and used for sealing and locking of the pipe and screw thread in chemical area, industry, civilian area, air-condition , water supply , military industry, gas pipe etc.
How to use
1,Clean the oil on the surface by cotton cloth before installation.
2,If install for copper, steel, iron pipe material above 25degree,do the pressure test after2-4 hours, if temperature between 25degree to 15degree,do the pressure test after 4-8hours,if temperature between 15degree to 0degree,do the pressure test after 8-16hours.If applied for the stainless steel, aluminum, alloy steel, the time to do the pressure test should be double long.
3, Good performance on sealing, do not need over tight when install. When lock the pipe within DN32, can be sealed totally just screw down by hand.
4, Coat the glue outside when applied on pipe for drinking water.