Firm Bond Spray Sealant
Product Description
FIRM BOND Spray Sealant is a rubberized sealant that sprays out as a liquid, seeps into cracks and holes, when dries to be a watertight, flexible coating. It is easy to coat, seal, and stop the leak fastly.
Application
Used for indoor and outdoor concrete structures, prefabricated concrete structures, cement plastering, brick walls and other base surfaces of the building floor; waterproofing works around drainage pipes, tunnels, toilets, and waterproofing and anticorrosive construction of stone and metal pipes.
Features & Benefits
1. Easy to use, portable, aerosols spray;
2. Stays flexible and pliable;
3. Service life can be many years;
4. Adapt to a variety of climates, anti-freezing and sun-proof without cracking;
5. After completely dry, it can be painted any color.
Instruction of Use
1. Make sure the surface is clean, dry, and free of grease, oil, and dirt; and no loose structure.
2. The width of spraying on the construction surface is not less than 15cm;
3. The joints can be covered with non-woven or polyester cloth for re-reinforcement spraying;
4. Shake about 1-2minutes before spraying. When spraying, keep the aerosol can upright and the angle with the horizontal plane must not be less than 45 degrees;
5.To wait 1 hour for curing after each spraying, and then continue spraying again, and so on.
6. Ensure that no water enters within 24 hours after construction.
7. It is recommended to cover the cracks and extend the spraying width by about 15-30cm, so as to easily cover the invisible water seepage point. It is recommended to cover the area where it is not sprayed with newspaper or film;
Precautions
1. For unknown materials, please test spray on a small area first, and use it if there is no adverse reaction after 10 minutes;
2. To wear glooves before using it. The recommend construction temperature is 5-30 centigrade degrees;
3. During construction, please ventilate, and face the back side for construction. The base surface is dry and dust-free, which is conducive to the coating effect. Please do not apply in rainy or severe cold environments;
4. Where the gap is greater than 2mm, it needs to be filled first.
5. Keep far away from children!
Emergency Handling
- In case of contact with eyes, flush immediately with plenty of water and seek medical advice.
- In case of ingestion, induce vomiting immediately and seek medical advice.
- If contact with skin, wash immediately with plenty of water and soap.
- In case of inhalation, remove immediately to fresh air. If not better, seek medical advice.
Handling of Empty Cans
- Before discarding, please spray the residue gas and content into waste carton, make sure the can is completely emptied.
- If necessary condition, open the can and clean it.
Storage & Shelf life
1. The product is flammable. Store in the cool and dry place at 0-40 centigrade degrees, far away from heat sources and open flames, and strictly prohibit exposure to the sun, puncture or incineration of the jar;
2. Shelf life: 12months.
Available color: White/Black/Transparent
Packing:
400g/bottle/pc, 12pcs/ctn
700g/bottle/pc,12pcs/ctn
· Small holes can be repaired automatically without causing secondary water leakage
· Can resist high temperature and low temperature
· Flexible and tensile, automatically recover after stretching
· Not easily to be damaged after repeated scraping, repair the traces
· High tightness, easy to repair leakage
The sprayed carton, after being filled with water, there is not leaking
Company Information
Changsha Firm Bond New Material Co., Ltd, belonging to core members of Shandong Meiduo Group, is a professional manufacturer and supplier of aerosol products, various adhesive and sealant products, mainly including Spray Polyurethane Foam(PU foam),Silicone Sealant, Nail-free Adhesive, PVC glue, Contact Glue, Wood Glue, etc, which widely used in the fields of building & decoration, hardware & tools, auto spare parts and daily life, etc.
We start exporting business from 2013, however our factory with more than 20 years production history , including 10 automatic production lines, iron can workshop, iron can printing and producing workshop to save cost and guarantee quality & delivery time. Now we have 2 production bases for our featured products PU foam and silicone sealant, one in Linyi city, Shandong province, one in Foshan city, Guangdong province.
To meet different needs in the world market, we provide OEM/private label and ODM service according to customer's special requests and samples. We also provide customer's one-stop sourcing solution needs for various adhesive and sealant products.
With strict quality control, powerful technology support, thoughtful after-sale service, our valuable products with stable quality and competitive price are widely accepted in the market. Never ceased to be empowered by innovation, best solutions on the sealing, bonding, coating, caulking and insulating.
"FIRM BOND" between you and us, your trusted choice.
FAQ
1.Can u send sample to us ?
Yes, the sample is free to you .
2.Can you give us private design ?
Yes, the MOQ with private design is 500cartons; for factory design, the MOQ is 200cartons
3.Where is your port?
QingDao/GuangZhou
4.What's your guarantee?
We guarantee goods quality is same as sample's and what we descrip.
5.Can you provide us your client information ?
Yes, for checking our company reputation and sample collection.
6.How many days you want to produce one 20'container?
2-3 weeks
7.Can we visit factory?
Yes, warmly welcome to visit us at any time.
8.Documents ?
Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.
Audited Supplier 
){kind=link}
){kind=link}